GTA V Big Map

YES!!!!!

WE DID IT!!!!!

We managed to make a Grand Theft Auto V map ready for your 3D printing.
Well yes, it is the largest available in the world!!!!
It is divided into 24 sectors and each of them is already scaled to be printed at approximately 7.5cm x 7.5cm (2,95inc x 2,95inc); not all sectors have the exact same size to avoid cuts that would have ruined the map.
In this way, you can obtain a map of approximately 30cm x 45cm (11.8inc x 17.7inc)!!!
However, nothing prevents you, if you have the possibility of printing even larger, from increasing the size and therefore obtaining an even more impressive result.
If you intend to change the proportions, use Sector F3 as the main measurement, which is the largest piece of all: if that one fits on the printing plate, all the others will fit comfortably too.

To get a crazy result, we recommend printing the project with a 0.1mm layer.
We know very well that the printing time takes a lot, but don't be too impatient: if you want to obtain an extraordinary result, 0.1mm is the height of the right layer.
Or even less, if you're really crazy.

If you want to amaze your friends and your printer has a print bed of at least 20cmx20cm, scale each Sector to 200%!

YOU WILL OBTAIN A MAP ALMOST A METER WIDE!!!!!!

Mount Chiliad will be approximately 8cm (3.15inc) tall!!!!!!

To join the various sectors together, we recommend using Loctite SuperAttack.
If your intention is to complete the map by painting it (we highly recommend this if you have a minimum of familiarity with the brush or the airbrush), use some plastic putty to hide the grooves of the unions of the sectors, then apply a few light layers of Prime and complete with Vallejo acrylic paints.
Refer to the image of the original map to choose the correct colors based on the areas.

Don't forget to share your print, give this project a like and have fun!!!!

– Layers: 0.1mm
– Infill: 15/20%
– Supports: NO
– Filament Color: White or Grey