Tube Notch Marking Tool 1",1-1/4", 1-1/2", 1-5/8", 1-3/4", 2" ,2.5" Angle Set

If you are building custom Roll Cage or tube bumper, this is the tool for you.

*You are buying the STL & STEP files to print using a 3D Printer.

This tool works for Aluminum, Stainless and Mild Steel tubing materials. You can use this tool to mark the tubing with a Sharpie and cut out a perfect notch to fit any angle in the set.

This set is for 1",1-1/4", 1-1/2", 1-5/8", 1-3/4" 2" , 2.5" in OD Tubing, It includes 15, 22.5, 30, 45, 60, 67.5, 75 and 90 degree angles. This is a complete set of 8 files to print for each of the 7 tubing sizes.
(ALL eight angle files are included for each tubing size)

This is a good fit for the tubing with 0.008 clearance, with a good chamfer angle to get your sharpie mark all the way around the tools.

A Chassis Fabricator friend was using paper templates for his extreme angles because most tube notchers are limited to 45 degrees. He asked if I could make these for him. He uses them every day for quick repeatable notches, these are the most common sizes that he uses.

**NOTE: I also have other sizes tubing and different angles available, simply DM me.

These are quick files to print, and they are designed for PLA.
I like to print them with a better quality setting (Optimal) due to some thin angle edges.
40% infill so they dont warp