Pen Holder - 08 - DuskDoodle

Introducing the "DuskDoodle" – the ultimate pen holder for your little one's creative space!

This charming monster-inspired pen holder adds a touch of fun to their desk. With its cute design and vibrant colors, the DuskDoodle pen holder keeps pens and pencils organized in a playful way. This compact and friendly monster is the perfect companion for sparking creativity in your child's artistic adventures. Say goodbye to ordinary pen holders and let the doodle buddy bring a smile to your little one's face as they embark on their colorful journey of doodles and drawings!

You can download this model for free at MakerWorld:
https://makerworld.com/es/models/100898#profileId-107688

Overall size: 100x150x75mm

Details:

1.Each STL file name containing the word “front” can be loaded and combined as parts of each other for multicolor 3D printing;

1. It was designed to be assembled with no glue using snap-fit features;

2. The middle part “08_DuskDoodle_Middle_Blue” is the part that holds everything together, was designed with comfortable tolerances (0.50). If, after printing, it is too loose, play with line width or flow settings to get as snug as you want, but you can always use a little glue for final assembly;

3. The top insert “08_DuskDoodle_Top_Insert_Light Blue” must be slid in place before the front or back is mounted on the plate, no glue needed

4. No supports needed;

5. I designed these pen holders to use wiggly eyes stickers for a very funny and 3D effect. You can find them on Amazon, eBay, Temu, AliExpress. However, if you don't want to use these stickers, the area is printed in white; you can even paint the expression you might want.

6. If requested, I can customize for you the front with the person's first name letter;

7. I can also design a pen holder inspired by one of your kids' drawings :)

8. If you don't want to print in multicolor printing fashion, all front parts except this one “08_DuskDoodle_Front_Blue”, can be printed separately, but you need to use XY compensation on Prusa slicer (Bambu/Orca, may have similar setting), with a negative value around -0.25 should be enough!

Have fun

Let me know if you have any comments!