Skip to content

Whooped tiefighter 6mm

tie_fwd.jpg Whooped tiefighter 6mm
tie_aft.jpg Whooped tiefighter 6mm
3307a5162cb33d962b08c3a2c2471131.png Whooped tiefighter 6mm
82355f186d4c1368b2c82d3f313a42e7.png Whooped tiefighter 6mm
wing_front.jpg Whooped tiefighter 6mm
wing_back.jpg Whooped tiefighter 6mm
body_raft.jpg Whooped tiefighter 6mm
wing_tiefighter_thin.stl Whooped tiefighter 6mm
6mm_body_tiefighter.stl Whooped tiefighter 6mm
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 458 views
  • 4 downloads
License
3D design format
Folder details Close
  • 6mm_body_tiefighter.stl
  • wing_tiefighter_thin.stl

Learn more about the formats
Publication date 2023-12-20 at 16:51
?
Published to Thingiverse on: 2018-10-16 at 21:51
Design number 1655900
kreidler

kreidler

3D printer file info

3D model description

Also inspired by the origin thing (https://www.thingiverse.com/thing:1978823) which is not available anymore but with the body of the remixed one.

The only modification is the reduced height of the wings (half of the origin height). You will need four wing parts. Two of each have to be glued together with OHP transparency film in the middle using non-blooming, long curing super glue. The film was coloured with a normal permanent marker before the glue was applied.

As this whoop is heavier than the normal ones you need in most cases better motors, and if possible a HV lipo. In order to give the HV type a better fit I enlarged the battery bracket with some heat from a soldering iron.

The motors I used can be found at https://micro-motor-warehouse.com/collections/all-motors/products/cl-0615-19
As FC the thing got an older F3-Beecore without OSD, Inductrix as well as Eachine e010 should be possible also.

UPDATE 2020-02-01: The thing is flying pretty well if you reduce the rates to a minimum. Due to the closed sides every yaw turn is a challenge without rate adjustment.
Short video: https://www.instagram.com/p/B4f-HcqDtEK/

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.