FPV camera mount TX01 TX02 TX03 CM275T FB90 E010 and others

Inspired by the newly published customizable mount generator http://www.thingiverse.com/thing:2023426 I have had an issue with the size of smaller cameras. If you want to use the lightest option on a e010, H36 or similar every thenth of a gram gives you a longer endurance and lift.
Therefore I did a small quick and dirty optimization for the 3.4g Fatbee FB90 AIO spare camera from Banggood http://www.banggood.com/Eachine-Fatbee-FB90-Micro-Racing-Quadcopter-Spare-Parts-5_8g-25MW-48CH-VTX-520TVL-CMOS-14-Camera-p-1108072.html or http://www.banggood.com/CM275T-5_8G-25mW-48CH-NTSCPAL-Mini-VTX-600TVL-FPV-Camera-for-DIY-Micro-FPV-Racer-p-1102464.html. Thing is mentioned under remix: https://www.thingiverse.com/thing:2219651

Nevertheless the outer radii and and the internal fixing of the camera box were not satisfying to me. In this version 2 horizontal and 2 vertical stringers are attached to the box. Moving the box to the left, right, fore or aft can now be done still having the box attached to the outer frame. Additionally the outer radius can be changed by 2 variables to fit nearly to any quad.

I did not submit this thing to the customizer due to too many options which could be configured. So, please customize by yourselves.

Attached are 2 identical SCAD files expcept for with the camera size and the box angle.
Additionally some preconfigured STLs.

As you can see on the pictures it is easier to print the whole thing with 4 holes and cut the not needed fixing points while mounting. Final printed weight for the small cam should be app. 0.8g.

Update 2018-03-03: Added a hand-made 0° cam 45° rotated TX03 version for the upcoming hovercrafts / tinywhoovs. SCAD programming is not working correctly. Just quick and dirty adjusted