Skip to content

Log House Similar to President Lincoln's House of Logs! Deluxe Version - Square, Rectangle, L Shaped, T Shaped & More!

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 1.9k views
  • 12 likes
  • 5 downloads
  • 2 collections
License
3D design format
STL and ZIP Folder details Close
  • 2B Double X Hinge Window Lincoln House.stl
  • 2B Hinge X Window Xmas Lincoln House Print.stl
  • 2B Rev X Hinge Window Xmas Lincoln House Print.stl
  • 3A 2166 inner Oval Chimney Lincoln House.stl
  • 3A 90 Degree L Roof Side Med Lincoln House.stl
  • 3A Roof Side Med Xmas Lincoln House Print.stl
  • 3B Connector Log Xmas Lincoln House Print.stl
  • 3B Huge Log Xmas Lincoln House Print.stl
  • 3B Large Log Xmas Lincoln House Print.stl
  • 3B Med Log Xmas Lincoln House Print.stl
  • 3B Small Log Xmas Lincoln House Print.stl
  • 3B half Large Log Xmas Lincoln House Print.stl
  • 3B half Log Huge Xmas Lincoln House Print.stl
  • 3B half Med Log Xmas Lincoln House Print.stl
  • 3B half Small Log Xmas Lincoln House Print.stl
  • 3C outer Oval Chimney Lincoln House.stl
  • 4A X Door Xmas Lincoln House Print.stl
  • 4C Dutch X Door Xmas Lincoln House Print.stl
  • 5A Rev X Door Xmas Lincoln House Print.stl
  • 5A Rev X Dutch Door Xmas Lincoln House Print.stl
  • 6D 1 cut 2mid Roof Shingled Med Xmas Lincoln House.stl
  • 6D 1 cut notched base Roof Shingled Med Xmas Lincoln House.stl
  • 6D 1 cut notched mid Roof Shingled Med Xmas Lincoln House.stl
  • 6D 1 cut peak Roof Shingled Med Lincoln House.stl
  • 6D 1 cut peak chimney Roof Shingled Med Lincoln House.stl
  • 6D 2 cut 2mid Roof Shingled Med Xmas Lincoln House.stl
  • 6D 2 cut notched base Roof Shingled Med Xmas Lincoln House.stl
  • 6D 2 cut notched mid Roof Shingled Med Xmas Lincoln House.stl
  • 6D 2 cut peak Roof Shingled Med Lincoln House.stl
  • 6D 2 cut peak chimney Roof Shingled Med Lincoln House.stl
  • 7A 1-2 Sm Roof Peak Shingled Med Lincoln House.stl
  • 7A 2-2 Sm Roof Peak Shingled Med Lincoln House.stl
  • 7A Sm Roof Base Shingled Med Xmas Lincoln House Print.stl
  • 7A Sm Roof Mid Shingled Med Xmas Lincoln House Print.stl
  • 7A lng 1-2 Roof Peak Shingled Med Xmas Lincoln House Print.stl
  • 7A lng 2-2 Roof Peak Shingled Med Xmas Lincoln House Print.stl
  • 7A lng Roof Base Shingled Med Xmas Lincoln House Print.stl
  • 7A lng Roof mid Shingled Med Xmas Lincoln House Print.stl
  • President Lincoln's House of Logs.zip
    • doors/4A X Door Xmas Lincoln House Print.stl
    • doors/4C Dutch X Door Xmas Lincoln House Print.stl
    • doors/5A Rev X Door Xmas Lincoln House Print.stl
    • doors/5A Rev X Dutch Door Xmas Lincoln House Print.stl
    • logs/3B Connector Log Xmas Lincoln House Print.stl
    • logs/3B half Large Log Xmas Lincoln House Print.stl
    • logs/3B half Log Huge Xmas Lincoln House Print.stl
    • logs/3B half Med Log Xmas Lincoln House Print.stl
    • logs/3B half Small Log Xmas Lincoln House Print.stl
    • logs/3B Huge Log Xmas Lincoln House Print.stl
    • logs/3B Large Log Xmas Lincoln House Print.stl
    • logs/3B Med Log Xmas Lincoln House Print.stl
    • logs/3B Small Log Xmas Lincoln House Print.stl
    • roof supports/3A 90 Degree L Roof Side Med Lincoln House.stl
    • roof supports/3A Roof Side Med Xmas Lincoln House Print.stl
    • Side roof for 90 degree room/6D 1 cut 2mid Roof Shingled Med Xmas Lincoln House.stl
    • Side roof for 90 degree room/6D 1 cut notched base Roof Shingled Med Xmas Lincoln House.stl
    • Side roof for 90 degree room/6D 1 cut notched mid Roof Shingled Med Xmas Lincoln House.stl
    • Side roof for 90 degree room/6D 1 cut peak chimney Roof Shingled Med Lincoln House.stl
    • Side roof for 90 degree room/6D 1 cut peak Roof Shingled Med Lincoln House.stl
    • Side roof for 90 degree room/6D 2 cut 2mid Roof Shingled Med Xmas Lincoln House.stl
    • Side roof for 90 degree room/6D 2 cut notched base Roof Shingled Med Xmas Lincoln House.stl
    • Side roof for 90 degree room/6D 2 cut notched mid Roof Shingled Med Xmas Lincoln House.stl
    • Side roof for 90 degree room/6D 2 cut peak chimney Roof Shingled Med Lincoln House.stl
    • Side roof for 90 degree room/6D 2 cut peak Roof Shingled Med Lincoln House.stl
    • Small and Long roofs/7A 1-2 Sm Roof Peak Shingled Med Lincoln House.stl
    • Small and Long roofs/7A 2-2 Sm Roof Peak Shingled Med Lincoln House.stl
    • Small and Long roofs/7A lng 1-2 Roof Peak Shingled Med Xmas Lincoln House Print.stl
    • Small and Long roofs/7A lng 2-2 Roof Peak Shingled Med Xmas Lincoln House Print.stl
    • Small and Long roofs/7A lng Roof Base Shingled Med Xmas Lincoln House Print.stl
    • Small and Long roofs/7A lng Roof mid Shingled Med Xmas Lincoln House Print.stl
    • Small and Long roofs/7A Sm Roof Base Shingled Med Xmas Lincoln House Print.stl
    • Small and Long roofs/7A Sm Roof Mid Shingled Med Xmas Lincoln House Print.stl
    • Windows/2B Double X Hinge Window Lincoln House.stl
    • Windows/2B Hinge X Window Xmas Lincoln House Print.stl
    • Windows/2B Rev X Hinge Window Xmas Lincoln House Print.stl

Learn more about the formats
Last update 2023-12-24 at 12:36
Publication date 2023-12-21 at 00:38
Design number 1656693
Socrates-Amsterdam

Socrates-Amsterdam

3D printer file info

3D model description

Build a Log House inspired by President Lincoln's Log House! The Deluxe Version has all the parts to make different houses: Square, Rectangle, L Shaped, T Shaped & More! Fun for all ages! Need more pieces? Crank up the 3D printer and fill the house with Log Cabins! Here is a video showing how each of the houses go together and how to remove the support and open the windows and doors for the first time after printing. https://youtu.be/UEfNDObshto

The base is made of 1/2 logs and full logs notched together. Doors and Windows are printed with one piece hinges and all open and close. Four lengths of logs are included from small to huge and two style of door: full length and Dutch double doors opening top and bottom separately. Three style of windows: Full single panel Left and Right Opening and Split halves opening side to side. Interlocking roof in a tile style secures on the roof trusses and a brick chimney with smoke stacks fits in the roof crown. The T and L shaped houses use a 90 degree side roof which locks into place to keep everything secure. The doors and windows have lintel beams on the tops to keep them in place and not falling over while the roof beams are off.

The doors, windows and roof truss pieces are designed to be printed in two colors with the faces showing the frame designs. Use a change filament command at the proper layer to pause the print and eject the filament allowing you to change to a different color to highlight the framing design. A second change color command a few layers later puts the color back to the main color. Here is a short video on how to make color changes: https://youtu.be/5vR1_HEw6Fs

All the files are zipped together arranged in folders as well. You can print multiples of the mid and base roof piece. Both the Long and Small Roof Mid pieces are two (2) per side or four (4) per roof. The Base Roof pieces are one (1) per side or two (2) per roof. All of the Cut Roof for the 90 degree roof are unique pieces. As are the peak roof pieces.

3D printing settings

For this model I used my fast settings: Adaptive layers between 0.16mm and 0.30mm. This makes much better curved surfaces and add only a little more time to the prints. Color changes are made at various layer heights, usually 3-4 layers before the surface face panel is printed up to the first layer when the frames are printed. The idea is to color the door or window panel but not the framing. A small line will be seen through the print, so I try to limit the number of layers. This is a more detailed video on how to find and set the color change layer numbers using SImplify3D slicer: https://youtu.be/maQcGIF4u0A

The Chimney and the Doors and Windows need support to print correctly. The Doors and Windows will BOTH need to be broken loose at first by pushing them from the backside to break them open. Pulling the doors open the first time using the handles will probably break the handles off (I did it once), but once open the handles are strong enough to use.

Change Color Command:
I used a change color command to make the roof truss, door and window faces a different color than the main wooden color.

To add the color changes to the S3D slicer I use the following code added on the Scripts tab under Post Processing.

{REPLACE "\nM117 Layer XXX, Z=" "\nM300 S2000 P100\nG91\nG1 X10 Y5 Z20\nM600 S500 P100\nG1 E-6.0 F1200\nG90\nM117 Layer XXX, Z="}; pause at layer, move head, play sound, change filament

Change the XXX in BOTH places to the layer height you wish the new color to start on. Determine this by slicing the part and picking the height for the color change and then seeing what layer that happens to be. Then change the code on the script tab to that layer in BOTH places.

The added code starts with the M300 which beeps to alert you of the color change. The G91 command makes the G1 move the extruder head using relative position moving the print head aside. M600 changes the color. Then I added a G1 retract to reduce any oozing. G90 goes back to regular position movements. Make sure you switch BOTH of the TWO (2) XXXs for the correct layer where the new color begins.

The doors and windows chance color two or three layers before the face layer and then changes back at the point the frame starts to print.

Categories

Designs β€Ί Game β€Ί Construction toys / Mechanical toys / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.