Snowstorm, Winter Dragon - Articulated Dragon Snap-Flex Fidget Toy

Print-In-Place, No Supports, Articulating Fidget Toy

Subscribe To the Mimetics 3D Commercial plan for rights to sell prints of your cool new friend.

Check out my latest articulate dragon here

Deep in the heart of winter's grasp, where icy tempests moan and rasp,
There dwells a dragon fierce and grand, the ruler of the snowy land.
With scales that shimmer like the dawn, and breath as cold as winter's yawn,
The frigid forces all take form, in movements of a great Snowstorm!

This articulated dragon is here to ensure you have a cool Christmas and an exciting holiday season.

Snowstorm is the twelfth creation in a series of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

Snap-Flex Collection:
This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the model to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience.

Each SNAP will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

Snap-Flex Instructions:
To Lock: Push Body Segments together
To Unlock: Pull Body Segments Apart

Tolerance:
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels of this model to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the Medium tolerance model. Find more info about this model and the other tolerances below:

Loose, Medium, and Tight Snowstorm available here:
https://www.mimetics3d.com/models/snowstorm

Please try out each to see what works best for you, and let me know which version you prefer!

Find my full portfolio of Snap-Flex Articulated models here:
https://www.mimetics3d.com/models

Make sure to revisit frequently for more thrilling Snap-Flex models to come. I'm eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial plan

For another fun Snap-Flex creature, check out:

Mimetics3D

Long Bony Basilisk - Snap-Flex Articulated Fidget Toy

• 45.6k views
• 561 likes
• 5.2k downloads
• 7 collections
• 5 comments
• 7 makes

Download US$4

Print Settings:
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
Good Bed Adhesion Required - Consider using glue stick or a well-spaced brim

Suggested Material: PLA or PLA+
Note: Silk PLA is too weak to hold up to repeated use of the Snap-Flex joint. Use silks at your own risk

No Supports, Print-In-Place at 100% scale
Printing any smaller may disable the Snap-Flex joint.

Printing larger than 100% will make the snap louder AND harder to pop, so be sure to do a shorter test print to make sure it's not TOO hard to snap into place.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.