Skip to content

mini-ITX case - Screwless

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 931 views
  • 8 downloads
License
3D design format
Folder details Close
  • 1_-_itx_case_V2_fixed.stl
  • 1_-_itx_case_protective_grille_head.stl
  • 1_-_itx_case_protective_grille_side.stl
  • 2_-_itx_case_cap_flat-BigV2.stl
  • 2_-_itx_case_cap_flat-V2.stl
  • 2_-_itx_case_cap_fullFrame_Big_V2.stl
  • 2_-_itx_case_cap_fullFrame_smal-V2.stl
  • 3_-_case_Button.stl
  • 3_-_case_Button2.stl
  • 3_-_case_Button2_ring.stl
  • 3_-_case_Button_ring.stl
  • 3_-_case_Front_Blende_1.stl
  • 3_-_case_Front_Blende_2.stl
  • 3_-_case_Front_middel_LED_close.stl
  • 3_-_case_Front_middel_LED_open.stl
  • 4_-_sata_case_V1.stl

Learn more about the formats
Publication date 2023-12-22 at 01:41
?
Published to Thingiverse on: 2019-02-06 at 22:00
Design number 1658960
jeracom

jeracom

3D printer file info

3D model description

ITX Gehäuse für 17cm x 17cm Boards (Case 19cm x 19cm x 7,7cm LBH). Gedruckt aus PETG, Ihr könnt natürlich auch was anderes nehmen :-) Hat ein wenig gedauert bis alles so passte wie ich es wollte. Die Blende hinten passt jetzt auch.
Der Satz besteht aus Gehäuse, Den Gehäusedeckel, den es in verschiedenen Ausführungen gibt. Die Frontblende, aus zwei Teilen, und die dazugehörigen Knöpfe mit den, rückseitigen Halterungen für die PC Schalter.

Frontblende, zwei Ausführungen mit Magnet oder mit Metall Stift. Front An Aus, offene geschlossene LED.

Frontplatte, Knöpfe, Magnete habe ich mit 2K Kleber verklebt.

Unter dem Board ist eine Schubblade, die noch zwei 2,5 Zoll Platten aufnehmen können. Unterm Board ist auch noch ein M2 Steckplatz den ich zusätzlich als Festplatte nutze.
Dazu zwei Lüfter Gitter, die ich mit Fliegengitter überzogen habe. Es ist nichts verschraubt, außer dem Mainboard. Der Rest ist mit Neodym Magneten befestigt.
Also bequem zu öffnen.

Benutz habe ich eine 35 Watt CPU

Da mit Strom gearbeitet wird, übernehme ich keine Gewährleistung

Sonstiges Sata Kabel usw…

================================

ITX case for 6,7 × 6,7 Zoll boards (Case 19cm x 19cm x 7,7cm LBH). Print in PETG, of course you can also take something else :-) . It took me a moment to get everything right. The rear panel also fits now.
The kit consists of housing, the housing cover.(in DIFFERENT VERSIONS) The front panel, made of two parts, and the associated buttons with the back brackets for the PC switches.

Front panel, two versions with magnet or with metal pin. Front On Off, open, closed LED cover.

Front panel, buttons, magnets I glued with 2K glue.

Below the board is a HDD-bag that can hold two 2.5 Zoll disks. Under the board is also an M2 slot.
In addition two fan grille, which I covered with insect screen. There is nothing screwed except the motherboard. The rest is fixed with Neodym magnets. Also easy to open.

I take a 35 watt CPU

Since I work with electricity, I take no warranty

Sata cables etc ...

I have used the following parts:
Ich habe folgend Teile benutzt:

PC Reset Schalter Kable ATX Power-Reset HDD https://www.amazon.de/gp/product/B07BT3ZZ8X/ref=ppx_yo_dt_b_asin_title_o05__o00_s01?ie=UTF8&psc=1

Thermaltake Engine 27 https://www.amazon.de/gp/product/B01M4J64GU/ref=ppx_yo_dt_b_asin_title_o06__o00_s01?ie=UTF8&psc=1
LEICKE Netzteil 120 Watt 12V https://www.amazon.de/gp/product/B006Z9TQE6/ref=ppx_yo_dt_b_asin_title_o05__o00_s00?ie=UTF8&psc=1

PicoPSU-150-XT 150W 12V DC-DC ATX Netzteil https://www.amazon.de/gp/product/B0045IXKTQ/ref=ppx_yo_dt_b_asin_title_o06__o00_s02?ie=UTF8&psc=1

Neodym Magnete 10x2 mm https://www.amazon.de/gp/product/B06X977K8L/ref=ppx_yo_dt_b_asin_title_o07__o00_s00?ie=UTF8&psc=1

Wenn Ihr die Arbeit unterstützen wollt, könnt Ihr gerne freiwillig Spenden
If you want to support the work, you are welcome to donate

Klick :-) :
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=R5F668VYAN3TU&source=url

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.