Asterix and Obelix Logo
Asterix and Obelix Logo
Published 2023-12-21T15:16:02+00:00
This logo can be used along with all my previous Asterix and Obelix models to create a complete display.
The main logo is meant to be printed with color changes and is one single STL file. The stand is printed separately and glued to the logo.
Enjoy!
**Print instructions**
Start with a gold color and then color changes as follows:
layer height 1.8mm change to black
layer height 2.6mm change to blue
Layer height 3.4 change to red
Following are the filaments I used:
Gold: Hatchbox - PLA, Gold
Black: Devil Designs - PLA, Black
Blue: Devil Designs - PLA, Blue
Red: Hatchbox - PLA, True Red
I've included a Prusa Slicer 3MF file that I used for this print with the color changes needed for the main logo.
Included is also a zip of parts (excluding the base) that can be used with the MMU/AMS/Palette.
(myminifactory expands zip files, so the files that contain 'mmu' are the files that were in the zip and are to be used only for multimaterial printing.)
Date published | 21/12/2023 |
Support Free | YES |