Mensch Ärger Dich nicht 6 players

Hello Community

Something different today.

Everyone knows it . Mensch Ärger dich nicht the game of games.

But unfortunately only ever with 4 players.

Here is the solution. Don't get angry at 6.

I hope you like it.

Note: As the board is very large, the cleaning strip ( test strip ) must be removed immediately.

It happened to me that it also melted. (See picture)

In addition, you should pay attention to the bed temperature (in my case PLA 60C° / at 65C° the 3mm base plate can warp.

8colors required

They can also be changed afterwards because I have exluded the fields to 2.99mm, so there is a 0.01mm difference.

Towers are aligned and made smaller otherwise it won't work with the pressure plate.

Maybe later I will create a thicker version with magnets on the sides and magnets at the bottom so that the game pieces automatically stay on the bed.

You have to take other figures first (I am currently creating some).

Have fun with it.

I would be very happy to receive suggestions, criticism, likes and praise.

Hello community

Something different today.

Everybody knows it . Man, don't bother with the game of games.

But unfortunately only 4 people.

Here is the solution. Man, don't get angry 6.

I hope you like it.

Note: Since the board is very large, the cleaning strip (test strip) must be removed immediately.

It happened to me that he merged with me. (See image)

You should also pay attention to the bed temperature (at PLA 60C° / at 65C° the 3mm base plate can warp.

8 colors necessary

They can also be changed later because I extruded the fields to 2.99mm, so there is a difference of 0.01mm.

Towers are aligned and made smaller otherwise the pressure plate won't work.

Maybe later I will create a thicker version with side magnets and bottom magnets that automatically hold the toy figures on the bed.

You have to use different game characters first (I'm currently creating some).

Have fun with it.

I would be very happy for suggestions, criticism, likes and praise.

Bambulab A1 0.4 Nozzle

Textured PEi Plate

0.16 Layer height

Wall line 2

Filling density 15% grid

8 colors required

Pay attention to temperature