Shadow Demon/Fiend - Smoke Monster
$5.00 Shadow Demon/Fiend - Smoke Monster
Published 2023-12-22T09:14:47+00:00
Thank you for clicking on my miniature!
This model can be used as a:
- Shadow Demon
- Shadow Fiend
- Smoke Demon
- Evil Spirit
- Phantom
- Possessed Ooze
- Smoke or Water Elemental
- Abomination
or any other kind of evil liquid/air creature that fits your fancy.
I have also INCLUDED SUPPORTED VERSION.
The Process:
I sculpted this miniature in ZBrush
I made the base in ZBrush and Maya
I have printed several iterations to test support locations and had moderate success.
If you need a recommendation on how to paint this bad boy as a Shadow demon:
- Prime in black
- dry brush a very dark gray, almost black
- dry brush a dark grey that is a few shades lighter than the previous
- continue dry brushing and moving up in shades until happy
Thank you!
- Bryan Parry
Portfolio:
https://bryan_parry.artstation.com/albums/10282786
The 3D printer setup I use as of upload: 03 Jan, 2024
- Elegoo Saturn 3
- Elegoo Standard 8K Space Gray Resin
- Lychee Slicer Pro
Printer Settings:
Layer Height - 0.040 mm
Bottom Layer Count - 3
Exposure Time - 2.800 s
Bottom Exposure Time - 35.00 s
Transition Layer - Count 10
Transition Type - Linear
Waiting Mode During Printing - Resting Time
Rest Time Before Lift - 1.000 s
Rest Time After Lift - 1.250 s
Rest Time After Retract - 1.000 s
Bottom Lift Distance - 3.000 + 4.000 mm
Lifting Distance - 3.000 + 4.000 mm
Bottom Retract Distance - 5.500 + 1.500 mm
Retract Distance - 5.500 + 1.500 mm
Bottom Lift Speed - 65.000 & 180.000 mm/min
Lifting Speed - 65.000 & 180.000 mm/min
Bottom Retract Speed - 180.000 & 65.000 mm/min
Retract Speed - 180.000 & 65.000 mm/min
Date published | 22/12/2023 |
Price | $5.00 |
I have updated the supports using Lychee. I am much more pleased with the professional quality of this version. I hope you all enjoy! *printed on an Elegoo Saturn 3. But that's not an option in the dropdown/