AEICCV09 – Ice Tower
$4.00 AEICCV09 – Ice Tower
Published 2023-12-22T04:20:48+00:00
AEICCV09 – Ice Tower by Carl Csurgo was not a planned set. Carl’s daughter Roxy is a huge fan of certain animated movies. She has forced repeated viewings of a specific and similarly-themed movie upon him the last few months. His torture and/or good parenting have spawned this latest release in our Ice Caverns series. Including a fantastic set of frozen furniture to fill out your frosty floorplans.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Date published | 22/12/2023 |
Price | $4.00 |
Support Free | YES |