Winged Hussar XVII Century Bust Presupported

Polish Winged Hussar bust, presupported at 1/12 scale. The Polish Winged Hussars were surely one of the most visually stunning cavalry units ever fielded. They were in use by the Polish-Lithuanian Commonwealth for about 200 years between 1503 and 1702. This bust depicts a hussar from the period of their greatest military prowess, the mid to late 17th century. During this period they famously helped to relieve the seige of Vienna, participating in one of (if not the) largest cavalry charge in history against the Ottomans.

Pre-Supported at 1/12 Scale
This model comes with a pre-supported version allowing for easy resin printing. The chitubox file is also supplied if customisation of supports is required.

As this model contains many fine details and delicate parts, care is recommended when removing supports to avoid damage.

Clipping off the supports before cleaning up with a sharp blade or file is the best method.

Multi-Part Construction
This model comes with multi-part construction. This allows for better orientation of parts for printing in order to achieve the best possible details.

The other advantage afforded is enhanced ease of painting, as parts may be painted separately- cutting down on areas which would otherwise be difficult to reach with the brush.

Hollowed Version
This model includes a hollowed version. The hollowed version is made available in order to reduce the amount of resin consumed.

If printing hollowed, curing the inside of the model is recommended.

Model is presupported for resin printers. Pictured print was made using a Phrozen Sonic Mighty 8k printer. Unsupported versions of the model are also included.