Long Rectangle Mold Housing Set - 2 Part Master - Make Your Own Moulds, 3 Lenths

Print your own mold housing at home and save money! You can use it to make a silicon mould and cast your own dice to sell. You can make two-part molds to cast custom DnD dice of any shape and size. The durable, reusable plastic mold box is easy to use, making it the perfect tool for resin/epoxy enthusiasts and DIYers. Do you need a custom height or diameter, I do custom mold housing! Send me a message!

You will need to make 2 prints of a size to make one complete frame. The walls can be held together with binder clips. For larger molds I strongly suggest using hot glue.

SIZES:
- Lengths: [ 3in, 5in, 7in ][ 76mm, 127mm, 178mm ]
- Widths: [ 1.5in ][ 38mm ]
- Heights: [ 1.5in ][ 38mm ]
- Vertical Walls are min of 0.2in [5mm] thick
- Base is 1in [25mm] wide by 0.2in [5mm] thick
- You will receive 3 files

USAGE:
🚫 You are not allowed to resell or redistribute these files in any way.
🚫 You cannot use these files for mass production.
✅ You can use these files for PERSONAL use.
Please contact me for a commercial usage license.

FOLLOW ME:
@TheTacoDimension

Layer Height: 0.2mm
Top/Bottom Layers: 4
Perimeters: 3 or 4
Seam: Nearest
Infill: 15%-20% Gyroid or Grid Pattern
No Supports
Temperature settings are dependent on filament and printer