PRACTICAL CARD BOX WITH 2 FOLDING DICE

Playing-card box with 2 folding dice integrated into the pack. They're easy to assemble, and can be disassembled using the hook ("HOOK") also integrated into the pack. After ten or so uses, you'll no longer need to use the hook to remove the dice.

The closure of the card pack is designed to allow the pack to be moved without opening with the cards inside.

The internal size of the box (90mm X 62mm X 22mm / 3,54 X 2,44 X 0,85 inch ) is designed to accommodate almost all decks of cards in their standard size.

Printing time varies between 4h30 and 10h, depending on the machine and its settings, for a total weight requiring between 95 and 130g. Tests were carried out with PLA+.

Now it's your turn!

details of the creation on Instagram: https://www.instagram.com/p/C1VRCJIr2FL/?img_index=1

Playing card box with 2 folding dice integrated into the pack. They're easy to assemble, and can be disassembled using the hook ("HOOK") also integrated into the pack. After ten or so uses, the hook will no longer be needed to remove the dice.

The card pack closure is designed to allow the pack to be moved without opening with the cards inside.

The internal size of the box (90mm X 62mm X 22mm) is designed to accommodate almost all decks of cards in their standard size.

Printing time varies between 4h30 and 10h, depending on the machine and its settings, for a total weight requiring between 95 and 130g. Tests were carried out with PLA+.

Now it's your turn!

See more on Instagram: https://www.instagram.com/p/C1VRCJIr2FL/?img_index=1

• NO SUPPORT! (direction of pieces in last photo); PRINT IN PLACE, SUPPORT FREE

• It's possible to print the whole batch on the same tray, but it's advisable to print the 2 dice separately;

• Fill rate:

Box Ext.: 10:15%

Box INT. : 10:15%

Game Dice: 60/100% (no Brim, recommended speed for first layer 40 mm/s)

Hook: 100% (no Brim)

• Gyroid pattern;

• First layer speed between 50 and 100 mm/s (depending on machine).

• NO SUPPORT! (direction of parts in last photo);

• It's possible to print the whole batch on the same tray, but it's advisable to print the 2 dice separately;

• Fill rate:

Box Ext.: 10:15%

Box INT. : 10:15%

Game Dice: 60/100% (no Brim, recommended speed for first layer at 40 mm/s)

Hook: 100% (no Brim)

• Gyroid pattern;

• First layer speed between 50 and 100 mm/s (depending on machine).