Hexchess Legends: Knights vs Ogres - The Ogres Set
$14.99 Hexchess Legends: Knights vs Ogres - The Ogres Set
3D
Published 2023-12-27T17:49:00+00:00
The complete Ogres set for Hexchess Legends: Knights vs Ogres!
The usual chess pieces - King, Queen, Rook, Bishop, Knight, and Pawn - and three heroes: The Grunt, The Conjuger, and The Witch Doctor!
---
Pre-supported versions included.
Multiple colors zip: Dear backers, the multi-colors folder includes models prepared for multi-color printing. These are larger files, and can be colored more easely using the latest slicers and region coloring features. If you're not going to use them for multi-color printing, I recommend using the single color files, or the pre-supported files, as they're smaller and faster to process.
Have a great time printing!
Visit the Kickstarter! Hexchess Legends: Knights vs Ogres
Follow my Instagram for more pictures and news on projects and campaigns.
And subscribe to my mailing list to get a free and exclusive piece whenever I launch a new project!
---
This project uses OpenLOCK
OpenLOCK BSD License
OpenLOCK is an open-source scenery building system developed by printablescenery.com
OpenLOCK is a trademark of Printable Scenery
Supports:
I've added pre-supported versions for both FDM and Resin printers.
For adding your own supports, I highly recommend using tree supports from these softwares: Bambu Studio (tree supports, auto, critical only, buildplate only); CURA Slicer (tree supports, buildplate only), and Prusa Slicer (organic supports, support on buildplate only, don't support bridges).
I had great, really great success using Bambu Studio auto generated tree supports for all the models, as that's how I've printed them myself before making the pre-supports for the campaign.
Infill and number of walls (perimeters):
You can use both grid or lightning infill, they both work great in my experience. The infill % really depends on two things: your budget and the weight of the pieces. If you want to save on filament, you can go as low as 5% infill and 2 walls, and use the socketed versions, for adding your own weights after the piece is printed.
Using fishing weights and clay, and finishing it with a linen cloth seems the way to go with the socketed pieces.
Layer height:
I recommend using 0.2mm or lower.
| Date published | 27/12/2023 |
| Price | $14.99 |