Dollhouse Balcony - Balustrade Porch Balcony Railing Set

Dollhouse Balcony - Balustrade Porch Balcony Railing Set. Miniature Window Balcony for Dollhouses - No supports needed. Supplied several versions for easy printing, scaling and assembly. Cab be easily printed with most standard printers. The easiest one to print is the one labeled "Dollhouse-Balcony-Center-Bottom-Print-in-place" with the top "Dollhouse-Balcony-Center-Top". Once printed assembly is simply placed on top. You can glue the top on but I made the wholes about 0.02 difference in size so they should snap in perfectly. For others out there that want more control and to print separate materials/pieces I also supplied "Dollhouse-Balcony right & left" prices separate. I can also supply them uncut and separate if needed, just ask. Update: Added a "Dollhouse-Balcony-Center-Top-Double-Bevel" version where the top has an additional second layer that sticks up and out a bit giving it that slab feel and added a "Short" version per request with the title "short-" in front that's only 32mm tall vs the 40mm.

This was printed using a Bambu X1-Carbon but have also printed them on a simple Ender 3 V2 Neo. Base size is 136.43mm x 46.31mm x 39.27mm so easily fit inside any 200x200 bed or smaller. Can be printed sin standard 0.2mm settings with no special changes but see sample specs below for better quality. The print only took me 2 hours total using generic silk PLA marble white at standard. I included a screenshot showing time and amount material used.

Best:

Nozzle: 0.4mm
Layer height: 0.08mm
First Layer height: 0.16mm
No Supports Needed!
2 Wall Lines/Lops
9 Top and 7 Bottom Layers
Infill Density: 100%

Optimal:

Nozzle: 0.4mm
Layer height: 0.16mm or 0.12mm
First Layer height: 0.2mm
No Supports!
2 Wall Lines/Lops
6 Top and 4 Bottom Layers
Infill Density: 50%

Strong:

Nozzle: 0.4mm
Layer height: 0.2mm
First Layer height: 0.2mm
No Supports!
6 Wall Lines/Lops
5 Top and 3 Bottom Layers
Infill Density: 25%

Standard:

Nozzle: 0.4mm
Layer height: 0.2mm
First Layer height: 0.2mm
No Supports!
2 Wall Lines/Lops
5 Top and 3 Bottom Layers
Infill Density: 15%

Model Size: 136.43 x 46.31 x 39.27