Unmatched Board Game Character Cases (Cobble & Fog) SLEEVED

This is the second set of an organization and storage solution for the Unmatched board game series. To see a short demo, click here. These designs cover the characters found in the Cobble & Fog set. It is designed for sleeved cards. If you want the unsleeved versions, please follow the links below. I will be releasing additional expansions regularly until cases for all the characters have been designed, and links for them will also be added as they become available.

Each character from the game has its own storage box measuring 141 × 108 × 35.5 mm. The box is comprised of two pieces: a top that stores the deck and a bottom that holds the character's mini, sidekick tokens, health counters, and special pieces. Thus, each case contains all of the pieces for its respective character.

Eight character cases fit into the large-sized (4-character) box, allowing significant space saving. In addition, each case can stand alone, allowing you to store your characters as desired. The fighter minis snap into place in each case. The rest of the game pieces are kept snugly, ensuring no additional wear and tear to tokens and cards from the case itself.

Every case can use two separate colors: one for the top and another for the bottom. This allows you to mix and match colors and make each character's storage solution unique. Both the top and the bottom pieces have two spaces that fit a 10 × 4 × 2 mm magnet in them. This allows the case to snap shut and stay together. The magnets can be inserted into the case during a live print at Layer 354–356 (for the top) and Layer 156–157 (for the bottom) when using a 0.2 mm layer height. They are not required, but they are a huge quality of life improvement. The magnets I used were purchased from Amazon. Any similar-sized magnet will work.

These models take a significant amount of time to print, so be aware. Obviously, print time and quality can vary. Note also that these cases use a fair amount of plastic. The final weight of my game box with 8 characters inside was 5.5 lbs or 2.5 kg. But, if you want an elegant and space-saving solution to store your Unmatched characters, there is no better option.

The planned release order for each Unmatched set is below:
- Battle of Legends, Volume One
- Cobble & Fog [You are here]
- Battle of Legends, Volume Two
- Robin Hood vs. Bigfoot; Little Red Riding Hood vs. Beowulf
- Buffy the Vampire Slayer
- Redemption Row; Bruce Lee
- Hell's Kitchen; Deadpool
- InGen vs. Raptors; Dr. Sattler vs. T. Rex
- Teen Spirit
- For King and Country
- Tales to Amaze
- Brains and Brawn
- Houdini vs. Genie; Sun's Origin

For the unsleeved cases, please use these links:
- Battle of Legends, Volume One
- Cobble & Fog
- Battle of Legends, Volume Two
- Robin Hood vs. Bigfoot; Little Red Riding Hood vs. Beowulf
- Buffy the Vampire Slayer
- Redemption Row; Bruce Lee
- Hell's Kitchen; Deadpool
- InGen vs. Raptors; Dr. Sattler vs. T. Rex
- Teen Spirit
- For King and Country
- Tales to Amaze
- Brains and Brawn
- Houdini vs. Genie; Sun's Origin

This project has been through hundreds of iterations over the course of 5 years, so the cost is simply to compensate time and plastic. I hope that you find it fair. If you have any questions or comments, please leave them below. Thank you so much for your support!

NOTE

Due to copyright issues, these cases cannot be sold with any brand elements (i.e., logo or art) belonging to the Unmatched game system or Restoration Games.

This product is not affiliated, approved, or endorsed by Restoration Games in any way.

If you have any questions about the above statement or about the product for sale here, please feel free to contact me directly.

Ideal if printed with a 0.4 mm nozzle and 0.2 mm layer height. Thin walls should also be enabled, so that your slicer will print thicknesses of 1.5 mm as four lines, not three. The rest of the settings should not impact print quality.

The top pieces will have to be rotated 90 degrees. No supports are needed for any of these prints.