Mega Man Springie

This Mega Man 3D-printable Springie is assembled from multiple parts, each designed for individual printing in vibrant colors. From Mega Man's iconic blue armor to his blaster arm, the segmented design allows you to print this model in the color of your choosing without the use of an AMS, MMU or Palette. It also reduces print times dramatically vs a multi-color print. it's a must-have for Mega Man enthusiasts. Bring the pixelated hero to life in the real world with this charming tribute, blending retro charm with cutting-edge technology.

I've used the following colors:

• Helmet, bottom & eye pupil (x2): Fillamentum PLA Extrafill Noble Blue
• Buster canon front inner disc & ear inner disc (x2): Fillamentum PLA Extrafill Traffic Red
• Buster canon front outer ring & buster canon side: Fillamentum PLA Extrafill Traffic Yellow
• Helmet front, helmet top, ear outer (x2) & spring: Geeetec PLA Water Blue
• Face: 3DJake ecoPLA Pastel Pink
• Eye left & right: Geeetec PLA White

Some parts need to be glued together depending on the dimensional accuracy of your printer.

Print the following parts twice:

• Eye pupil
• Ear inner disc
• Ear outer

The used spring is designed by 3D Printy (https://thangs.com/designer/3DPrinty) (Parametric Bobblehead Springs (https://thangs.com/designer/3DPrinty/3d-model/Parametric%20Bobblehead%20Springs-365301))
The head is based on the Mega Man Key Ring (https://www.thingiverse.com/thing:2000263) created by William_Additive (https://www.thingiverse.com/william_additive/designs).

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller Patreon subscription.

Helmet, bottom, spring & face

• Tree supports
• 15% infill
• Arachne wall generator recommended for better dimensional accuracy.

Eye left, eye right, eye pupil, buster canon front inner disc, buster canon front outer ring, buster canon side & ear inner disc

• No supports
• Outer Brim
• 100% infill

Helmet front, helmet top, ear outer

• No supports
• 15% infill