Snowballer snow ball maker

The Snowballer - strong and modular tool in making snowballs

A standard 90mm (3.5") diameter snowball mold is included with a poop shaped mold. Fling perfectly shaped snowballs at your friends.

Three handle types are included and are completely interchangeable, clicking into place.

This design is superior to to all the other snowball makers out there. It has been designed with FDM printing in mind to optimize strength. It also does not require supports due to minimal overhangs.

Print some of these and be a snowball making machine!

Scaling information
A 90mm snowball can be large for some people, so the design is intended to scale down and has been tested from 100% to 60% scale.
100% scale for adults
80-90% scale for small adults
60-80% scale for kids

For reference: 10 year old girl will likely use 70% scale

Snowball and Poo Mold Bases
Approx size: 100mm x 100mm x 55mm
Walls: 2 minimum
Infill: 15% minimum
Print time: varies with printer and settings, generally from 2-8hours
Printer type: FDM or resin
Recommended material: PLA or PETG
Supports: not required

Handles
Approx size: 100mm x 80mm x 25mm
Walls: 2 minimum
Infill: 15% minimum
Print time: varies with printer and settings, generally from 1-4hours
Printer type: FDM recommended due to snap in feature flexing
Recommended material: PLA or PETG
Supports: not required