Portals Nymph Mask Face

Portals Nymph Inspired Mask - Face with separate eyes. Design optimised for great printing with a flat surface at the top and options of eyes so you can print them seperatly in white, paint and glue them on afterwards!

If you want to buy a physical mask to wear and don’t have a 3D printer, please see my other listings as I will be selling physical 3D printed masks, ears and combinations on Etsy @RebzFX.

Eye holes in the bottom set desined to have black mesh fitted (optional ) and you can see well out of the mask.

The details such as the lips, eye liner and hearts are 3D modelled to help you with an outline for symmetrical painting.

Mask is approx 4mm thick so could be Filament or resin printed. This is designed for filament printing. I have printed this is PLA and it works well. I used tree support for both the mask and eyes. I suggest using support blockers on the side holes to save material but not needed.

To wear this, add a strap to the the holes in the design. You can use elastic or an adjustable bra strap! I suggest adding some foam to the inside of the mask for a customised fit and comfort.

NOT FOR RESALE, REDISTRIBUTION OR COMMERCIAL USE. THIS IS ONLY FOR YOUR OWN PERSONAL USE. This is a listing for the DIGTAL 3D MODEL FILES ONLY. This is for your own use only to wear and you can NOT sell the file or physical 3D prints, you can NOT share or adapt the file.

Use a 20mm brim and tree supports at 0.2mm layer height and use adaptive layers.