Velociraptor fossil

The "Velociraptor Fossil1" 3D model is a captivating digital representation of a Velociraptor fossil, intricately capturing the essence of this ancient predator in three-dimensional detail. The replica provides an authentic glimpse into the Velociraptor's skeletal structure, allowing paleontology enthusiasts to virtually explore the bones of this prehistoric creature. Ideal for natural history enthusiasts and educators alike, this 3D model offers the opportunity to closely examine the form and proportions of the Velociraptor, highlighting its significance in the field of paleontology.

Nozzle Temperature:

PLA: 190-220°C

ABS: 220-250°C

PETG: 230-250°C

Bed Temperature:

PLA: 50-60°C

ABS: 80-100°C

PETG: 75-85°C

Print Speed:

Layer Speed: 30-60 mm/s (may vary depending on the printer and desired quality)

Layer Height:

PLA: 0.1-0.3 mm

ABS: 0.1-0.3 mm

PETG: 0.1-0.3 mm

Ventilation:

PLA: 100% for top layers

ABS: 0-30% FOR TOP LAYERS

PETG: 50-100% FOR TOP LAYERS

Retraction:

Distance: 1-5 mm (depending on the material and printer)

Speed: 40-80 mm/s

Infill:

PLA/ABS: 15-30%.

PETG: 20-40%

Bed Adhesion:

Adhesive tape, hairspray, or specialized print surface depending on the material.

Remember that these values are just guidelines. It is important to adjust them according to the characteristics of your printer and the specifications of the filament you are using. Also, consider the recommendations from the filament and printer manufacturers.