TICKET TO RIDE EUROPE INSERTS / INTERNAL ORGANIZER BY AM-MEDIA

TICKET TO RIDE EUROPE PRINTABLE INSERTS / INTERNAL ORGANIZER
THIS IS THE BEST LOOKING INSERTS FOR TICKET TO RIDE EUROPE THAT YOU CAN PRINT!

🎺 FEATURES 🎺
This is a 3D printable inserts for the board game TICKET TO RIDE EUROPE, designed to organise ALL the components of the game inside the original box. Thanks to the interlocking lids, you can place the box horizontally or vertically without worries, as nothing will be able to fall out of the box. Inserts also support sleeved cards.

✅ Easy to print, no support needed
✅ They can be printed on ALL 3D printers with a minimum build volume of 180x180x70mm
✅ They can be stored in either horizontal or vertical position
✅ All boxes have an interlocking lid, no magnet required!
✅ Experiment with multi-colors printing and you will create a unique kit!
✅ Support sleeved cards

🎨 MULTICOLOR WITH ANY 3D PRINTER ! 🎨
You can also printing the lids in different colors, in fact, along with the normal files you will also find versions with very nice graphics that fit the game's graphic style; you can print in different colors with a normal 3D printer, just by using the color change gcode command. Each colour is set to a different height to allow for filament changes USING M600 G-CODE COMMAND. I personally recommend PrusaSlicer, which makes it damn easy to set colour change pauses, but of course you can do this with any other slicer. I've written an article on this topic: https://www.am-media.biz/mastering-multicolor-3d-printing-with-prusaslicer-a-comprehensive-guide-420/ - in the photos you can see a preview of the slicer, on the right you can see the color changes and their respective heights.

📐 SCALE/DIMENSIONS 📐
Please do not alter the dimensions of the file as this may make the model unprintable.

⚠ IMPORTANT INFO ⚠
The interlocks of the lids are designed with tolerances suitable for printing with simple home printers, in fact all my inserts are tested with an old Ender 3 first model. I recommend that you print a single insert with its lid first and test the fit before proceeding with anything else, if the fit is too tight it means that you need to calibrate your printer correctly.

The total size of the organiser is 286x287x67mm (including game board and instruction book). Although rarely, it may happen that due to differences in production, printing and edition, box sizes may vary slightly. Please measure the inside of the game box to confirm compatibility.

© 2023 www.am-media.biz - This is a third-party accessory designed by AM-MEDIA. All product names are trademarks of their respective owners, which are in no way associated or affiliated with AM-MEDIA