Skip to content

Marvin the Martian Telescope

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.5k views
  • 21 likes
  • 143 downloads
  • 3 collections
License
3D design format
Folder details Close
  • Marvin_Body.stl
  • Marvin_Body_Pin.stl
  • Marvin_Broom.stl
  • Marvin_Broom_Bottom.stl
  • Marvin_Eye_Balls.stl
  • Marvin_Face.stl
  • Marvin_Hands.stl
  • Marvin_Helmet.stl
  • Marvin_Helmet_Post.stl
  • Marvin_Laces.stl
  • Marvin_Legs.stl
  • Marvin_Pupils.stl
  • Marvin_Shoe_Dots.stl
  • Marvin_Shoes.stl
  • Marvin_Skirt.stl
  • Marvin_Soles.stl
  • Telescope_Arch_Ball_Half_Pcs.stl
  • Telescope_Arch_Pc.stl
  • Telescope_Arch_Pcs_Apart.stl
  • Telescope_Arch_W-Balls.stl
  • Telescope_Base_Bolts.stl
  • Telescope_Base_Cone_Pc.stl
  • Telescope_Base_Pc.stl
  • Telescope_Base_Pc_Ring.stl
  • Telescope_Bench_Base.stl
  • Telescope_Bench_Base_Bolts.stl
  • Telescope_Bench_Base_Cone.stl
  • Telescope_Bench_Base_Ring.stl
  • Telescope_Bench_Post.stl
  • Telescope_Bench_Top_Bolts.stl
  • Telescope_Bench_Top_Under_Bubble.stl
  • Telescope_Bench_Top_W-Bolts.stl
  • Telescope_Body_1.stl
  • Telescope_Btm_End_3.stl
  • Telescope_Center_Arch_Pole.stl
  • Telescope_Center_Arch_Pole_Ring_Halves.stl
  • Telescope_Eye_Pc_Post.stl
  • Telescope_Front_Site-Handle_Posts.stl
  • Telescope_Front_Site-Handle_Posts_Toppers_Halves.stl
  • Telescope_Lg_Lens.stl
  • Telescope_Post_Cap.stl
  • Telescope_Side_Detail-Support_6.stl
  • Telescope_Side_Laser_Body.stl
  • Telescope_Side_Laser_Disk-Ring-Peg_-_Post.stl
  • Telescope_Side_Lens_Ball.stl
  • Telescope_Sm_Lens.stl
  • Telescope_Sm_Lens_Holder_Circle.stl
  • Telescope_Sm_Lens_Post.stl
  • Telescope_Top_End_2.stl

Learn more about the formats
Publication date 2024-01-03 at 04:27
?
Published to Thingiverse on: 2023-03-10 at 08:00
Design number 1684413
OldNewbie

OldNewbie

3D printer file info

3D model description

Here is a multi-colored Marvin Telescope. It's a remix (bigtime remix) of one you find here on Thingiverse. Everything should fit right into place.

Be aware of your pieces as you print. The ball in the arch are very curtail to get lined up correctly. When you glue the helves together take your time and line them up. The telescope stands roughly about 13" high, the bench is almost 3 ", and Marvin stands almost 6" tall on it's own.

When you put together the center post of the telescope make sure to install all the rings from the top then glue the post together. The side rail that goes on the side must be square with the top and bottom telescope ends. I would use a small square or even as easy as a post-it to check square it up. When putting Marvin together Make sure you lean him forward a bit from the ankles. if not he can tip backwards. You can also just glue him down to the bench to prevent him from falling backwards. It would be better to put Marvin together last to make sure his line of site is even with the telescope angle. It should sit just right but just double check.

I used multiple printer for this project. Smaller pieces were done on my Monoprice select Mini V2, Medium pieces were on my Ender 3 Pro, Big pieces were printed on my Artillery X1,Sunlu S8 and My X-Maker.

If you get stuck on anything while your putting it together please don't hesitate to ask and most of all let me know if I forgot any of the pieces. I always appreciate tips if you like my work, If you'd like to leave a tip: PayPal.Me/3DCopper

Pleas if you have any questions don't hesitate to ask.
Don't forget to post your final project pics, hope it's a fun build for you Yall and most of all ENJOY!!!

Remixed from: https://www.thingiverse.com/thing:4918092

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.