Bmw Night lamp

Design:

The lamp has a cylinder shape with a nice image of the designer FAR, below I leave link to his work for you to support him.

https://www.behance.net/563580362571b

Materials:

The lamp is designed to be 3D printed using PLA or ABS, two common and easy to work with materials. You can choose a color to match the aesthetics of your room or print the parts in different colors to highlight details.

Light source:

Inside the cylinder is a space designed to insert a small bulb, which will provide soft, ambient lighting. You can opt for a warm tone light to create a cozy atmosphere.

Base:

The lamp rests on a base that reflects the colors of the mythical M Series of the BMW brand.

Mounting:

The lamp consists of several 3D printed parts that are easily assembled. The design is optimized for easy printing and hassle-free assembly. Detailed instructions will be included to facilitate the assembly process and its printing. then you will have to print on a DIN A4 sheet the attached image and glue it with glue stick to the inside of the cylinder.

You will need: bulb, socket, wire and switch.

This 3D printed BMW lamp will not only light up your bedside table in style, but it will also be a unique piece that will attract the eyes of fans of the series. I hope this design will meet your expectations!

NOTE: Commercial license for this product is available upon request for selected customers please contact me for more information en:makerthinking@outlook.es

3D PRINTING PARAMETERS

layer height: 0.2

Printed on: Ender 3

-Base: take into account the wire you are going to ultilize for the lamp since the perforation is 2mm, if the wire to ultilize is thicker you can subtract a cylinder from the measurement with 3dBuilder for example.

-Lamp attribute: The lamp attribute are intended for sockets of about 20mm diameter, you can also modify them to your need in 3d Builder software.

-Lithophany: For the central part of the lamp is necessary to print it in white color, then we will print on a sheet of paper the image called lithocolor and glue it with glue glue to the inside of the cylinder.

-Dome: The dome of the lamp is intended to be printed in 2 colors for easier post-processing.

If you have any questions about how to print the pieces or how to assemble it just contact me.

Cutter used: UltimakerCura

layer height: 0.15

I made the different colors of the base with the filament change of the Ultimaker Cura software, in the postprocessing tab.