Honeycomb Chalk Case

This is a honeycomb pattern chalk case.
The special feature is that when you turn the round part on the bottom clockwise with a coin, the chalk rises. If you turn it in the opposite direction, it goes down again.
The height of the chalk is adjustable.
Here are the supplies you need:

1. Neodymium round magnet (1) 2mm x 2mm : 8 EA (2) 10mm x 1mm : 1 EA
2. Thin iron plate: 1 EA

• Attach a thin iron plate to the bottom of the chalk. Attach a 10mm magnet to the end of the bottom bolt and fasten the bolt to the main body. By inserting the chalk into the main body, the height can be adjusted using bolts.

• If you do not have a steel plate or 10mm magnet, just attach the chalk to the floor with double-sided tape.

• The Chalk Case series continues. Enjoy!

object size - (1) honey_base body : 29x29x20
(2) honey_cover body : 29x29x13
(2) honey_honey base : 32x32x21
(2) honey_honey cover : 32x32x14
(2) honey_honey bolt : 20x20x5

print setup (prusa mk3s)
(1) nozzle : 210 (size : 0.4mm / height : 0.2mm)
(2) bed : 60
(3) infill : 20%
(4) support : No need
(4) time - honey_base body : 43min
- honey_cover body : 30 min
- honey_honey base : 40 min
- honey_honey cover : 28 min
- honey_honey bolt : 9 min