MixnMatch Dragon buddy (Commercial Use)

This is a MixnMatch Buddy that that you need two files for: you will need to print a body file (keychain hole/without, multicolor/single) and a wing file (AMS multicolor/2color layer change/single). Once everything is printed, just clip the wings in! 
 
This download comes with the OG dragon files only:
OG dragon body multicolor/ single color, with/without key chain whole, as 3MF and STL files
OG dragon wings as 3MF multicolor and STL single color
Reseller badge

Anything designed by me with the MixnMatch label in the title, will all be able to be used interchangeably if it is the correct body part- all wings will work with the wing slots etc.
 
That's right- 
you want a luna moth body with these dragon wings? Print these wings and that body instead! Prefer the fire moth wings, but the Charizard (inspired) body more? print that body and those wings! 
 
No supports are needed for printing:
Body
2-3 walls
10%gyroid infill
 
Wings
2-3 walls
15-20% gyroid infill - I recommend a higher infill on these just so that they are a little more sturdy ( they have a thickness around 3.0 -3.6 mm)
 
There will be other MixnMatch Buddies uploaded…to mix and match!
OG Dragon (This one, OG just stands for original, as it was the first dragon designed in the set, I am not name creative)
Faerie Dragon
Frankie the Charizard dragon 
 
Others completed but needing uploading:
Fire moth
Luna moth
Moonlight moth
 
 
 
This a Commercial use file - buy it once and sell physical copies forever. If you would like to print for private use only, it is available at this link.
 

https://makerworld.com/en/models/184953#profileId-203651

No supports are needed for printing:
Body
2-3 walls
10%gyroid infill
 
Wings
2-3 walls
15-20% gyroid infill - I recommend a higher infill on these just so that they are a little more sturdy ( they have a thickness around 3.0 -3.6 mm)
 
Notes: The wings should not be constantly switched out - there is a chance for wear on the open wing link with weaker materials like matte. The idea I was going for booth wise was that a child could pick and choose there favorite parts to have their own unique buddy that is unique and special that they “helped” create. If the wings need to be removed, hold the wing as close to the open link as possible and turn the wing so the opening is at the back when you pull. 
 
Happy printing! Tested on Bambu p1p