Crude remix, in which I used Orca to split the part into 3 pieces in order to change powerbrick mount dimensions to accommodate the power adapter I received from iOptron.  I then blended the middle part so that it smoothly transitioned into the tripod side of the mount.  NOTE: the tripod side was originally designed for a Sky-watcher tripod but the design did fit the LiteRoc so I left it as is.

My powerbrick has little knubs on the bottom which makes it difficult to slide the brick between the mount arms.  I was able to put one side of the middle of the powerbrick into the mount and then lightly bend the arm to snap the powerbrick in place.

Printing:

• Used PLA, but PETG would be better
• Infill = 30%
• Ironing turned on

Based on this original design, https://www.printables.com/model/254561-12v-10a-power-brick-tripod-mount-for-sky-watcher-e.