Nissan versa key multicolor in the same layer

Nissan versa keychain three colors in the same layer.
I recommend watching the video to be able to print on the same layer
Content:
3 files, and one video
-Firsts you can import the 3 files in the same projet, and selection all and select combine models, then ungroup, and eliminate ( nissan versa lights and rins2 and the file that say nissan versa base black3). You need to create 3 different Gcodes with each of the car parts, where you will change the color
print ¨nissan versa body 1¨ that the color that you want, with this characteristics
(100% stuffed, Z jump only in printed parts, jump height in Z of 1.0 mm, activate retractions and speed of 10 mm/s). This piece should not take more than 6 minutes to print.
After this print, you need to keep the bed warm, and chanse the filament color.
-In the second you need print ¨nissan versa ligths and rins 2¨ with the same characteristics
-And then you need to print ´nissan versa base black3´, (100% stuffed, Z jump only in printed parts, Jump Height in Z of 1.0 mm, active retractions and speed of 60 mm/s).

CURA settings:
100 % suffet, active Z jump only in printed parts, Jump height in z of 1.0 mm, active retractions and speed of 10 mm/s (in the part 1 and 2) and 60mm/s for part 3, the base black.