Kanna Kamui from Kobayashi-san Chi no Maid Dragon
Filament painting made by HueForge.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
Filaments Used:
- PLA BambuLab Matte Ivory White
- PLA BambuLab Matte Charcoal
- PLA BambuLab Matte Lilac Purple
- PLA BambuLab Matte Sakura Pink
Swap Instructions:
- Start with Ivory White
- At layer #5 (0.4mm) swap to Charcoal
- At layer #17 (0.88mm) swap to Lilac Purple
- At layer #26 (1.24mm) swap to Sakura Pink
- At layer #37 (1.68mm) swap to Ivory White for the rest.