RC Chassis Bottom Assembly Board

Assembly Boards currnetly made for the following Arrma 6S 1/8 scale BLX/EXB/EBS RC Vehicles
- Kraton
- Notorious
- Outcast
- Talion
- Typhon
- Mohave
If you don't see the vehicle you would like to have one made as a special request, contact me via the Facebook page link provided below.

It is strongly advised that your printer has been properly calibrated (Frame square, PID Tuning, and E-steps) before printing these STL files. Visit Teaching Tech for calibration procedures. https://teachingtechyt.github.io/calibration.html

Check print settings at the bottom of the page for required parts to complete this print.

Feel free to share pictures of your prints by clicking on the Makes link and upload it.
Also don't forget to rate and hit that like button please.

More Assembly boards to come.
If you have any requests, questions, or concerns, you can message me via my FB page or leave a comment below. I check this account on a regular basis.
https://www.facebook.com/jim.loobey

These files and or printed versions of these files are for personal use ONLY unless I have personally authorized and arranged an agreement with the purchaser of these files.

The files, pictures, and or 3d printed forms are not to be used any way and or of the following in any way, shape, form, or fashion of the below listed or of any similar kind:
commercial, online and or locale sales, startups, fundraisers, auctions, etc.
If you interested in selling the 3d printed versions of these files, you can reach me via the facebook link provided above.

I have included a PDF settings file that was used for these prints, adjust accordingly to your printer and setup.

Arrma Chassis Bottom Board Dims:
- Requires 2 M2.5 x 10mm Flathead Cap screws to complete this print.
Ar-Chas-F-Bot-Board-V01
L: 179
W: 136
H: 18.2
Arrma Chassis Rear Bottom Board Dims:
Ar-Chas-R-Bot-Board-V01
L: 179
W: 136
H: 18.2
Print time (each): Approx 10H
Filament (each): 30m