3D model description
Organizers for Eldritch Horror board game - base game + expansion Forsaken Lore, version 2. All organizers fit the base game box very well and provide quick game setup. Sliding lids prevent components from falling out during the storage. Theme cutouts decorate lids.
The set contains: Resources organizer 1, Resources organizer 2, Large Card tray, Small Card tray, Monster & Myth organizer, Ancient One card organizer, Investigator token & stand organizer, Gate tile & Dice organizer and Sheet container. Different lids for different containers. 4 types of dividers.
- RESOURCES ORGANIZER 1: The organizer for: Health and Sanity tokens, value 1 and 3 separately, Tickets and Improvement tokens. 2 of such containers should be printed, so they can be placed on 2 sides of the table, thus all players can easily reach for components. Rounded bottom facilitates the draw. Indentations in front wall make Improvement tokens well visible and facilitate taking them out.
- RESOURCES ORGANIZER 2: It has 3 sections for: Eldritch tokens, Clue tokens and a group of other tokens (e.i.: doom, rumor, omen, mystery, lead investigator and active expedition token). Rounded bottom facilitates the draw.
- LARGE CARD TRAY: The tray with 3 sections for 3 decks. 2 of such trays should be printed as there are many decks to be prepared for the play. One tray is dedicated for America, Europe and Asia Encounter cards. The second one for: general Encounter, Other world and Clue cards. Each tray has a lid with different cutouts to distinguish them. Sloped bottom and indentations facilitate the draw.
- SMALL CARD TRAY: The tray has 4 sections for 4 decks: Asset, Condition, Spell and Artifact cards. It has sloped bottom and indentation, so card draw is very comfortable. (Reference cards are kept with Artifacts.)
- MONSTER & MYTH ORGANIZER: Normal monster tiles, Epic monster tiles and Myth cards are accommodated here. Sections for monsters have serration to prevent tiles from sliding down. Stopper and simple Divider help to separate components already used in the game or chosen epic monsters. The section for Normal monsters is longer than it is needed for tiles in the base game and Forsaken Lore expansion. So there's space left for more tiles just in case. Still Stopper is wide enough to cover the extra space. Card tray has slopped bottom and indentation to facilitate the draw. All Myth cards are kept here. 2 Myth Dividers should be 3d printed to separate yellow blue and green decks. The third divider could be used to separate myth card pile prepared before the play.
- ANCIENT ONE CARD ORGANIZER: There are 6 slots for Ancient One card sets in this organizer. So far I use only 5 of them (from the base game + Forsaken Lore expansion). The organizer is composed of 2 pieces that are assembled and glued together. Special guides are designed to make Left part connect tight to the Right one. Super glue helps to keep it that way forever. This solution is introduced as the whole container is longer than my Prusa bed size. (Please, use 0.15 mm layer height so the assembly is flawless). In each section there are also guides for sliding lids, so each compartment can be closed separately. I have designed 5 lids with cutouts related to 5 Ancient Ones that I have. There is also .stl of plain lid provided (without any cutouts). There is a Divider that helps separate different decks in one pile (it's the same as in my version 1). Print as many as you need.
- INVESTIGATOR TOKEN & STAND ORGANIZER: Quite pleasant organizer for Investigator tokens and stands. 2 slots for 2 piles of tokens. Indentations facilitate taking tile out. A larger section provides enough space for all stands that come with the game. I shaped the container with recesses on 2 sides. It helps taking the container out of the box. If you take it out first, it will go easier with other containers that cannot have such recesses. I really like how the lid turned out for this container :)
- GATE TILE & DICE ORGANIZER: A section for Gate tiles has indentation to facilitate taking tile out. A section for Dice has a slide, so it's easy to take die out.
- SHEET CONTAINER: This is just a simple container for Investigator and Ancient One sheets. Indentation facilitates taking sheet out. A Divider is provided to separate 2 decks. There is no lid for this container, because of the lack of enough space. Still this organizers set fit the game box so well that it functions as an insert. Nothing bad should happen to these sheets.
Some photos in higher resolution available on imgur:
The set, organizers closed
The set, organizers open
Packed
Half unpacked
Resources organizer 1
Resources organizer 2
Large card tray, Gates
Small card tray
Monster & Myth organizer
Ancient One organizer, lids
Investigator token & stand organizer
Sheet container and divider
Note1: Please, note that all organizers are adjusted for cards without sleeves.
Note2: I have left some room for the next expansion in organizers (e.g. additional slot in Ancient One organizer, extra space for Monster tiles), however I don't know if it will be enough.
Note3: Special thanks to Fractal Dreamers for my favorite inspirational background music to design :)
3D printing settings
All organizers were 3Dprinted on Prusa MK4 (with InputShaper):
- in PLA (F3D Gold Pearl),
- No support is needed,
- Infill 10-15% gyroid/rectilinear.
Note1: I use slightly changed 0.15mm SPEED MK4 default print settings in PrusaSlicer.
Note2: 0.2 mm layer height was set for: Dividers and Sheet container. Lids and guides in containers were adjusted for 0.15 mm layer height.
Note3: Monotonic lines for top fill in lids as default.
Printing Time (for one item of each kind, with InputShaper):
2h5' - Resources organizer 1, container
1h6' - Resources organizer 1, lid
1h59 - Resources organizer 2, container
1h9' - Resources organizer 2, lid
3h23' - Large Card tray, container
1h59' - Large Card tray, lid Gates
1h28' - Large Card tray, lid Continents
2h59' - Small Card tray, container
1h26' - Small Card tray, lid
3h5' - Monster & Myth organizer, container
1h27' - Monster & Myth organizer, lid
26' - Myth Divider
7' - Monster Divider
24' - Monster Stopper
2h22' - Ancient One card organizer, Left piece
2h13' - Ancient One card organizer, Right piece
24-42' - Ancient One card organizer, lid
17' - Ancient One card Divider
1h30' - Investigator token & stand organizer, container
1h2' - Investigator token & stand organizer, lid
1h31' - Gate tile & Dice organizer, container
15' - Gate tile & Dice organizer, lid
54' - Sheet container
1h - Sheet Divider
