Repair your plastic fridge drawers with this. I know they are large but my drawers were in very bad shape. Both of my drawer handles were broken clean off and one of the drawers was cracked nearly all the way in half at the front. With the cracked drawer I used clear silicone behind the 3D print and used M4 x 10 screws to hold it together. The other drawer with the missing handle I only used the screws and it has been working great. You can drill additional holes where required. I hope this helps someone out because it saved me hundreds of dollars.
Note: Use a heat gun to shape the plate to the same curvature as your plastic drawer. I placed the repair plate over the plastic drawer with the drawer standing on its back. I screwed the plate into the drawer at the top edge only and then used the heat gun to shape the repair plate to the same shape as the drawer. I then finished drilling the holes as required.