适用于A1mini（A1理论上也可以，但是我没有）的爱莉希雅挤出机logo，需要取下前盖使用

缩小尺寸后，由于打印机精度问题，效果不佳，故没有根据原logo尺寸设计

孔安装时的松紧程度可能随使用耗材不同而变化（即使材料类型相同），若装配过紧可自行下载模型并使用SolidWorks更改

无AMS时，可在26层手动添加暂停后更换耗材打印，以实现多色效果

3D-Printed logo of Elysia for Bambu A1mini extruder (theoretically suitable for A1, but I don't own one) .

The limited accuracy of the printer leads to poor appearence after changing the size of the logo,so front-cap removal is required while using.

The size of the hole at the bottom may vary with different material used（even if the type of the material is same), so you may download the original sldprt file and change the size with Solidworks.

If you don't have an AMS, you may manually add a pause at the layer 26 and change the filament to achieve the same effect