Ready to print

U can choose between latte brown or other skins colours 

I only suggest to use red but not matte cuz is more shiny

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Red Transmission Distance: 5

PLA BambuLab Matte Latte Brown Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:

Start with Black

At layer #5 (0.48mm) swap to Red

At layer #7 (0.64mm) swap to Latte Brown

At layer #11 (0.96mm) swap to Jade White for the rest.