1/25 Vintage Style Racing Lap Belt

This listing is for a vintage style racing lap seat belt that would be ideal for anything from your 60s street machine, your vintage road racing car, your rat rod, or whatever else you feel like putting them in.

Included are three files, one for the buckle itself, one for the latch, and one for both parts connected. For the belts themselves, I typically use painters tape, which I paint and then feed through the buckle once dry, and then glue the tail of the belt to the backside of said belt. I know ribbon is a popular material for belts, however it may be too thick to use with these buckles.

The buckles are scaled to 1/25 scale as default, but can be rescaled to fit any of your model car needs. Due to the small size and details, I would only print these using a resin (SLA) Printer

As always, if you have any questions or concerns, feel free to message me on here, or on my Instagram (@Moss_Rods)

Please note: this part is ONLY for personal use, the resale of the part in digital or physical form is not allowed. Please feel free to enjoy using these on your personal builds, and be sure to share pics of them being put to use :)

These were test printed on an Anycubic M5s using Anycubic black resin at a .03mm layer height, at 3.2 seconds per layer.