HotWheels Lift
Copyright Claim
HotWheels Lift
Boost
51
58
10
Print Profile(4)
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
0.28mm layer, 2 walls, 15% infill
Designer
27 min
1 plate
6x stand, 0.2mm layer, 2 walls, 15% infill
Designer
2.4 h
3 plates
0.2mm layer, 2 walls, 15% infill
36 min
1 plate
Boost
51
58
10
3
110
66
Released
Description
HotWheels stand for two cars resembling actual car lift. Can be used for any other 1/64 scale car models.
You need to print one top platform, one bottom and TWO sides to assemble.
Use some superglue to increase rigidity.
Comment & Rating (10)
All
super organizer for my scale cars, to improve soon a little more height in Z but otherwise very good many thanks
0
Reply
Print Profile
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
vraiment super utile. pour mes modèle lost
0
Reply
Print Profile
6x stand, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
0
Reply
Print Profile
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.28mm layer, 2 walls, 15% infill
0
Reply
Print Profile
4x stand - one plate, 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld