Skulldier - Soldier Skull

Hi All!

This is The Skulldier (Skull Soldier) the new addition to the skulls collection.

As always this guy is printed in parts, and this time you can put the helmet on or off so if you are just looking for a smoking skull - You can print only that.

It can be placed on the large bullet or on the straps as you can see in the photos - your choice.

The large bullet has an inside insert if you wish to print that version so make sure you print the correct files as there are also single file versions.

The helmet bullets are "simple" ones without inserts at the bottom, but if you want to use the bullets with the silver insert also for the helmet - You can scale the large one to 40% and it will fit on the helmet!

Helmet has a small easter egg on the tags 😉 But I also made a helmet without tags if you prefer it.

The Skull needs supports mainly inside the mouth for the teeth and the top of the inside - use tree supports.

Straps require some supports, also use a raft when you print them - Push them carefully inside the helmet

No Glue Required for any part!

Nothing here is painted except the tags - I made all the colors by switching filaments mid-print (Gave the green some shadowing and effects)

A kind request, Please help supporting the work of all 3D artists!
Do not sell or share digital files bought here and on other sites.
Buying this model DOES NOT allow you to sell physical copies of it, It is for personal use only. All my original designs are Copyright protected.

If you want to sell my prints commercially, you can join my Patreon:
https://www.patreon.com/3DGeex

Check out my social media accounts to see what I'm doing next:
https://www.instagram.com/3dgeex
https://www.tiktok.com/@3dgeex
https://youtube.com/@3dgeex

Thanks, Michael - 3DGeex

Use 2-3 walls for all parts
10%-15% infill will be enough

Use minor supports for:
Skull - for the inside parts
Helmet center (will work without but will look nicer with)
Straps - Use also a Raft.