Baldur's Gate 3 Soul Coin - 3D Model for SLA Printing

Summoners and adventurers, the essence of Baldur's Gate 3 has been captured! Introducing the Soul Coin, a must-have 3D relic for any fan of the game and the Dungeons & Dragons universe. This coin not only symbolizes wealth and power, but also holds the key to Karlach's Infernal Rage, adding 1d4 fire damage to his already formidable attack.

Unique Characteristics of the Model:

Extreme Detail: Modeled for SLA printing, this design captures every ancient rune and mystical symbol, ensuring that each coin is a perfect replica, worthy of any Dungeon Master's or gamer's treasure.

Gaming Potential: not only a collector's item, but also a functional gaming tool that can be used to grant special powers or as a quest item within your D&D campaign.

Customization for Painting: The coin is designed to be painted and customized, allowing details to stand out and each piece to tell its own story.

Application and Use:

Whether you're looking to elevate the authenticity of your cosplay, add a unique element to your next gaming session, or simply appreciate the craftsmanship of a well-designed object, the Soul Coin is a must-have addition. Inspired by Karlach's quest and designed for those who yearn to bring their Baldur's Gate experience into the real world, this coin awaits you.

Download your model today and prepare to unleash the power of the Infernal Rage in your games. Who will know how to use it wisely and who will burn with the fire of their greed?

To print the "Baldur's Gate 3" Soul Coin on a SLA (stereolithography) printer, it is crucial to adjust the printing parameters to capture all the fine details of the design. Here I offer you a guide to the recommended parameters:

Model Preparation:

Orientation: place the coin slightly tilted to reduce the amount of supports needed and to avoid marks on the main faces of the coin.

Supports: Make sure the supports are sufficient to keep the model stable during printing, but as thin as possible to facilitate removal and minimize post-processing marks.

Print Parameters:

Layer Resolution: For fine details, such as will be found on the Soul Coin, a low layer resolution of 0.025 mm to 0.05 mm is recommended.

Exposure: Adjust the exposure time according to the resin manufacturer's recommendations. Exposure time may vary, but is generally in the range of 8-12 seconds per layer for standard resins.

Lift Speed: Set a moderate to slow lift speed to minimize forces that could cause deformation or detachment of the model from the build platform.

Post-Processing:

Cleaning: Clean the coin in an isopropyl alcohol (IPA) bath to remove uncured resin. An ultrasonic bath may be helpful, followed by a gentle rinse.

UV Curing: Cure the coin under UV light to complete the resin polymerization process. Curing time can be 5 to 10 minutes under a suitable UV light source.

Additional Tips:

Testing: You may need to perform some tests to adjust specific parameters for your model and resin.

Safety: Always wear personal protective equipment, such as gloves and safety glasses, when handling resins and during the cleaning process.

Calibration: Make sure the printer is properly calibrated and the print platform is level to ensure the best print quality.

These parameters are starting points and may require fine tuning depending on the specifications of your SLA printer, the resin you are using and the conditions of your printing environment.

Video: https://youtu.be/2pU6TKb2mYQ