POKEMON CARD RACK AND DISPLAY STAND

If you already have your shelves full, this design will help you get more space and display your favorite Pokemon cards. The cards are stored and protected in these cases (one per case) which in turn you can attach to a shelf and keep them organized.Up to 5 cases can be placed vertically per holder).

The housings are designed to fit perfectly in the Regular 3 "x4" UP Toploader sleeves we typically use to protect our cards.

They can be placed in two ways: see video

On the shelf or as a display.

The protective housings and decoration covers are attached by magnets to each other and the shelf bracket by a screw.

Two sizes of screws are included, depending on the thickness of the shelf,

The design has slots for attaching an LED strip.

STL FILES: 7 STL FILES

• MEDIUM SCREW SUPPORT.stl

• LARGE SCREW SUPPORT.stl

• SUPPORT CARCASA ULTRA PRO.stl

• HOUSING SUPPORT COVER ULTRA PRO.stl

• MAGNET HOUSING ULTRA PRO.stl

• POKEMON LETTERS.stl

• COVER SUPPORT COVER CASING LETTERS POKEMON.stl

English:

If you already have your shelves full, this design will help you get more space and display your favorite Pokémon cards. The cards are stored and protected in these cases (one per case) which in turn can be attached to a shelf and kept organized. Up to 5 cases can be placed vertically per support)

The sleeves are designed to fit perfectly into the Toploader Regular 3 "x4" UP sleeves that we usually use to protect our cards.

They can be placed in two ways: see video

On the shelf or as a display.

The protective casings and decorative covers are held together with magnets and the shelf support with a screw.

Two sizes of screws are included, depending on the thickness of the shelf,

The design has some slots to be able to stick an LED strip on it.

STL FILES: 7 STL FILES

• MEDIUM SCREW SUPPORT.stl

• LARGE SCREW SUPPORT.stl

• ULTRA PRO HOUSING SUPPORT.stl

• ULTRA PRO CASING SUPPORT COVER.stl

• ULTRA PRO MAGNET HOUSING.stl

• POKEMON LETTERS.stl

• POKEMON LETTERS CASING SUPPORT COVER.stl

Printed on PLA, ender S1 and Creality K1.

Basic parameters

Initial layer 0.32

Layer height 0.24

Wall lines 3

Upper and lower layers 3

20% fill

minimum 35% fill only ULTRA PRO HOUSING SUPPORT, it is the part that will have to withstand the most force.

EXPANSIONS:

Holes for 5mm x 2mm magnets (for letter case).

Holes for magnets of 10mmx2mm (for shelf support with both sizes of magnets).

the area where the magnets go, I have given them x-y gap compensation of 0.2 and contour compensation of -0.05 in Orca Slicer. I advise before printing the entire piece and waste material, cut the piece and test the expansion of holes and the position on the bed of the piece when printing. So it is better to test depending on the laminator and printer. IMPORTANT: if you change the position of the part on the bed also change the expansions, keep that in mind.

SUPPORTS:

I advise an xy object support distance of 0.68mm for easy removal of the supports.

English:

Printed in PLA, ender S1 and Creality K1.

Basic parameters

Initial layer 0.32

Layer height 0.24

Wall lines 3

Top and bottom layers 3

filling 20%

filling 35% minimum only ULTRA PRO CASING SUPPORT, it is the piece that must withstand the most force.

EXPANSIONS:

Holes for 5mm x 2mm magnets (for letter casing)

Holes for 10mmx2mm magnets (for shelf support it takes both sizes of magnets).

the area where the magnets go, I have given them x-y gap compensation of 0.2 and contour compensation of -0.05 in Orca Slicer. I advise before printing the entire part and wasting material, cutting out the part and testing the expansion of the holes and the position on the bed of the part when printing it. So better to test depending on the laminator and printer. IMPORTANT: if you change the position of the piece on the bed, the expansions also change, keep that in mind.

SUPPORTS:

I recommend an xy object support distance of 0.68mm for easy removal of the supports.