Dell Latitude 5430 Vertical Laptop Stand
Remixed by
Boost
11
10
10
Print Profile(1)
0.2mm layer, 3 walls, 10% infill
Designer
2.4 h
1 plate
Boost
11
10
10
0
46
30
Released
Description
A vertical laptop stand for a Dell Latitude 5430. This was remixed to fit the profile which is slightly thinner than the model it was remixed from. Also added a plate to fix the two vertical brackets that are spaced far enough apart to allow for airflow through the vents. The air does get quite warn but I haven't had any issues with the stand printed in PLA-CF. If you are concerned then maybe a filament that can withstand higher temperatures can be used
Comment & Rating (10)
All
Print Profile
0.2mm layer, 3 walls, 10% infill
Perfect, with PETG
1
Reply
turned out great in petg
0
Reply
will the 5440 also fit ?
The designer has replied
0
Reply
don’t know, you will have to try it
0
Reply
Replying to @Reckit
works 🙏
0
Reply
Replying to @FSfd4cmn9kqb
nice
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld