Bricks Venom
Bricks Venom
Print Profile(2)
Description
https://www.patreon.com/waltersworld
Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you
We are Venom!
L3GO inspired, stands approximately 8 inches tall and is fully articulating! Two versions of the chest are included, as some had trouble removing supports when printing vertically. The split horizontal chest does require glue or some other bonding agent to reassmble. I tried using the built in pegs and dowel rods, but it never aligned perfectly, so I opted to do without. It's a small enough piece that it shouldn't require it. I use DAP Rapid Fuse from the Home Depot, it has a long enough working time to allow for readjustments after gluing.
When gluing, glue only on the inner edge! Otherwise you'll have squeeze out and the glue will stain the model. I recommend some small spring clamps also to keep it in place once glued until dry. The seam is nearly invisible after putting the arms and head on.
Be sure to check out our other L3GO inspired Marvel models! More are being added weekly!
Comment & Rating (31)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
