Book of Vishanti air humidifier

"By the Hoary Hosts of HoGGoth,
Of the Vishanti´s brilliant glow.
May these words form sound and meaning,
for those wherein magicks flow."

A humidifier inspired by the depiction of the book Vishanti from the movie Doctor Strange - Multiverse of Madness. The mighty Vishanti book is mounted on a column from which water mist rises. Together with the placement, lighting effects and vapor, the whole creates an amazing spectacle.
This humidifier is a great decoration that also humidifies the air in the room while it is running. It is also possible to use this for aromatherapy if you add some aromatic oils to the water.

This is not a stand-alone humidifier. You will need to purchase an immersion humidifier (verk 12241 or similar with the same dimensions - 47x47x40mm).

The assembly itself is very simple. Just print everything out.
In the case of the column, you have the option to print them in 2 parts and then glue them together (instant glue worked well for me) because of the time issue.
A minor problem could arise with printing the part called "BoV-LID". So be careful when removing the supports. This part serves as a holder for the other parts and also as a cap to keep water from splashing out.
To make the lighting effects stand out well, I recommend printing the "BoV-LID" and "BoV-GLOW" parts from clear filament. Once printed, the two parts will stick together. Make sure that the "BoV-GLOW" part is slightly rotated.
The water heats up while the humidifier is running and can deform the model. I printed with PLA, but I recommend printing at least "BoV-LID" from a material that has a higher defomation temperature than PLA, such as ABS.

Happy printing!

printed on the Ender 3
nozzle: 0,4mm
material: PLA
supports required
printing time (everything): around 27h
size: 128 x 135 x 233 mm (+-)