V1.1: 29. Dec. 2023

• Improved the hand for easier printing

Based on DUMMY 13 Beta - Oct. 2023 

• Used the head to design a mask
• Other used remixes are also partly remixes of DUMMY 13

You will need the original DUMMY 13 model. Get yours from the link above.

Description

DUMMY 13 loves COMIC CON!

So I have started to design a whole series of characters and costumes for DUMMY 13. This is another costume from the series "DUMMY13 goes to COMIC CON".

The aim is to preserve the charm and simplicity of Dummy 13.

Now to the content of DUMMander Shepard, sorry Commander Shepard:

• Breather helmet (this time we need support for the visor)
• Hand with a M6 Carnifex (print vertically, use support and brim)
• M8 Avenger for standard grip hand (use support for the barrels)
• N7 logo for the armor
• Cleaned armor version without the “13”
• Other parts are standard parts

Print at 0.15mm layer height or less!

The STL files are already aligned as they should be printed.

Female Armor: For the female version, use a female armor from my female body set
Rifle hand: If you want to use a "rifle hand" with the M8 Avenger, take a look here
N7 Logo: You get the best results for the logo with a 0.25 mm nozzle and 0.05 layer height The logo is glued on the armor Use color change from black to white and paint the last symbol red after printing The runners can help with the positioning of the logo during application Simply remove them carefully afterwards.	Some inspirations
Helmet: Check the inside to see if it has been printed cleanly and remove any filament debris that is sticking out Has the brim been removed cleanly? The elephant foot can cause the inner rim to be a little too narrow, just sand the inner rim down a little or work it with a knife Slide the head into the helmet and press it in with gentle force on the chin