Hueforge One piece from an image found on pinterest.
filaments used:
JAYO PLA + black
JAYO PLA + gray
JAYO PLA + red
JAYO PLA + white
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm
Start with Black
At layer #15 (0,80mm) swap to Red
At layer #35 (1,60mm) swap to grey
At layer #46 (2,04mm) swap to white for the rest.
You can scale the model up to 200x200 mm. Don't change the height