Token and resource trays with storage boxes for board games

As a board game enthusiast, I couldn't find any bowls to hold tokens, resources or coins, so I had some fun creating these different bowls, with or without compartments. A storage space for 5 cups was then created.

The cups can be printed out and mixed and matched to suit your play habits and desires.

Please contact me for further details.

If you like the project, please put a Like. If you have printed it, please send me a feedback and put a note *****, please.

Have a good game.

FDM printer used: Bambu Lab P1P

Nozzle: 0.4mm

Wires: Bambu PLA Matte

• Cups

Dimensions : 120 x 120 x 20mm

Imprint layer: 0.12mm

Walls : 2

Filling: 15% adaptive cubic

Print time: 1h45 to 3h30 depending on settings (whether adaptive or fixed layer height,.... or other depending on your printing habits and machine)

• Storage box

Dimensions: 125.8 x 123.4 x 119.4 mm

Print layer: 0.12mm min. with layer adaptation

Walls: 2

Filling: 15% adaptive cubic

Printing time: 9h30 (To be seen according to your settings...)

For my part, I prefer to print the box with the storage up, with a stand. The finish of the curves on the back of the box is not perfect. A little sanding or the addition of material is in order.

The gap between the box and the cups is 0.5 to 1mm. The cups are easy to remove from the storage box.

Version :

V001 - 2024/02