Model of a Lusatian or Half-Timbered house (synonymous names).
The scale of the model is H0/HO 1:87.
- I suggest printing in parts to maintain the best possible print quality.
- A layer of 0.08mm for the Bambu Lab 0.4 nozzle setting is great, you can increase the layer to 0.12 or 0.16 depending on the orientation you are printing in.
- You don't need any support
The printing method I used can be seen in the Gif below.
Step 1. glue the walls together (take into account the orientation of the walls and their side)
Step 2. press the windows in (if the print goes in with too much resistance you can use a cutter to (slightly!) trim the windows. They should press in without the need for glue, if this is not the case in your case use glue.
Step 3. Glue the 'main' roof in place
Step 4. Glue the small roof
Step 5. glue the walls in the loft
Step 6. Tighten up the door frame and doors
Step 7. Enjoy your print!
- roof - PLA COSMIC VIOLET (Noctuo Filaments)
- walls and windows - PLA WHITE (Noctuo Filaments)
- wood elements - EASY PLA BROWN (Fiberlogy Filaments)