No Print Profile yet. Add one to earn points.
Hello!
This is the largest color set print I've done so far, please feel free to swap colors accordingly as you see fit!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Matte Black Transmission Distance: 0.1
PLA Paramount 3D Fighter Jet Blue Transmission Distance: 1.5
PLA PolyLite Steel Grey Transmission Distance: 1
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite Grey Transmission Distance: 1
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Black
At layer #8 (0.72mm) swap to Fighter Jet Blue
At layer #10 (0.88mm) swap to Steel Grey
At layer #12 (1.04mm) swap to Dark Red
At layer #13 (1.12mm) swap to Sakura Pink
At layer #14 (1.2mm) swap to Red
At layer #16 (1.36mm) swap to Grey
At layer #17 (1.44mm) swap to Ivory White for the rest.