This model was originally created and posted by JamesThePrinter. Thank you for making this wonderful model.
However, I personally was having one issue though. The tail section kept coming loose from the build plate. I noticed that it was essentially printing a thumb size link on an edge of just a few mm.
So I decided to trim the bottom plane by 3mm giving it a larger foot print for improved adhesion and stability. I also added some spheres to the eyes to help the pupils pop a little more. Its not much but I feel that it really helped improve reliability and quality. Let me know what you think. Thank you!
General Settings:
0.4mm Nozzle
0.2mm First Layer
0.14 mm Rest of Layers
3 Walls
6/4 Solid Top/Bottom Layers
8% Gyroid Infill