Caecilia

Pencil and Brush Table Stand - P1P

Came out great. Supports on the top plate were a little tricky to remove because their "brims" covered the entire cell. Otherwise it seems stable and didn't require glue to stay together. Printed in black Elegoo PLA+

Sideduck

thanks for feedback. i dont use brim.. u try without it? 

edit: ah u mean brim from support.. i use organic/tree (AUTO TREE/DEFAULT) and there only directly under support, 

intommy

Yeah, the support base covered the whole thing and I got confused about how best to pull it out. I just cut next to the walls then used some pliers, and that worked fine. Ultimately it wasn't an issue or anything to fix - I just figured I'd mention it in case others came across the same thing

Parts fit together perfectly with this profile, and I can finally get my paintbrushes organized! Thanks!

strongIndustries

Pencil and Brush Desk Stand - A1 mini

I'm glad it works. Also, thanks for the feedback

Straight forward and pretty strong. I use it as a little shelf.

eleumartinez0707

printed perfect, my wife loves it for he craft table

towmanjeff

dibonSvk

great job, worked out well for displaying my pencil toppers

Tuttlescreation

Good idea printed from PETG and PC, will upload a pic

trjh17

Aklex

ralph75

IMG_3522_48cae35a-e5c5-4789-92bb-97b08ad4a0f6.jpeg

IMG_3524_3952b6c2-f93b-4bba-acd4-93888470fbae.jpeg

IMG_3523_35d75914-4117-409d-9738-53f218a5f6bb.jpeg

Snímek obrazovky 2024-02-18 102642_2880372e-a5ae-4a36-8cbf-4f4036532a9a.png

IMG_3524_97f581a9-4311-4bae-894d-bbcc40fcae19.webp

IMG_3523_745c4c35-4270-40a2-b6be-bd7b2a268d95.webp

IMG_3522_91b3f0f7-f22c-4f8a-8712-22b366402893.webp

Snímek obrazovky 2024-02-18 102642_35236602-8a54-4523-aef2-3b44e8e98b17.webp

plate_1.webp

plate_2.webp

plate_3.webp

manual_support

plate_1.png

plate_2.png

plate_3.png

0.2mm layer, 2 walls, 15% infill&nbsp;Simply a stand for pencils or brushes, markers, crayons. Dimensions 180x130x100 mm The height can be increased by extending the pillar before printing In case of a problem with tolerance, it is possible to reduce the size in the X/Y axis on plate 3. The current size is tested and printed on P1P and A1 mini printers. Both prints were ok.The parts should be easy to put together, of course it is also possible to use glue************************************************Jednoduchy stojan na tuzky nebo stetce, fixy, pastelky. Rozmery 180x130x100 mm Vysku je mozno zvysit prodlouzenim pilaru pred tiskem V pripade problemu s toleranci, je mozne snizit na plátu 3 velikost v osax X/Y. Aktualni velikost je vyzkousena a tistena na tiskarne P1P a A1 mini. Oba vytisky byly ok.Casti k sobe by mely jit jendoduse vlozit, samozrejme je take moznost pouzit lepidlo************************************************

IMG_3522_eb36d6c6-d455-4170-9f7a-ae7b6b5e2099.webp

IMG_3523_ce83b22c-33b2-4bfc-b9ed-9a375b75e232.webp

IMG_3524_c6a15e5d-06c1-4f46-b020-ae24a21cc3c7.webp

Snímek obrazovky 2024-02-18 102642_2880372e-a5ae-4a36-8cbf-4f4036532a9a.webp

0.2mm layer, 2 walls, 15% infill / but also there no problem with 0,28 layer---------------------------------------------------------------------------------------------------Simply a stand for pencils or brushes, markers, crayons. Dimensions 180x130x100 mm The height can be increased by extending the pillar before printing In case of a problem with tolerance, it is possible to reduce the size in the X/Y axis on plate 3. The current size is tested and printed on P1P and A1 mini printers. Both prints were ok.The parts should be easy to put together, of course it is also possible to use glue************************************************Jednoduchy stojan na tuzky nebo stetce, fixy, pastelky. Rozmery 180x130x100 mm Vysku je mozno zvysit prodlouzenim pilaru pred tiskem V pripade problemu s toleranci, je mozne snizit na plátu 3 velikost v osax X/Y. Aktualni velikost je vyzkousena a tistena na tiskarne P1P a A1 mini. Oba vytisky byly ok.Casti k sobe by mely jit jendoduse vlozit, samozrejme je take moznost pouzit lepidlo************************************************

Simply a stand for pencils or brushes, markers, crayons. Dimensions 180x130x100 mm The height can be increased by extending the pillar before printing In case of a problem with tolerance, it is possible to reduce the size in the X/Y axis on plate 3. The current size is tested and printed on P1P and A1 mini printers. Both prints were ok.The parts should be easy to put together, of course it is also possible to use glue************************************************Jednoduchy stojan na tuzky nebo stetce, fixy, pastelky. Rozmery 180x130x100 mm Vysku je mozno zvysit prodlouzenim pilaru pred tiskem V pripade problemu s toleranci, je mozne snizit na plátu 3 velikost v osax X/Y. Aktualni velikost je vyzkousena a tistena na tiskarne P1P a A1 mini. Oba vytisky byly ok.Casti k sobe by mely jit jendoduse vlozit, samozrejme je take moznost pouzit lepidlo************************************************&nbsp;

Print Profile(2)

Description

Comment & Rating (20)

License

Related Models

Paint Brush Stand

Mechanical Carpenter Pencil

Oral-b io stand

Desk / Table Cable Organizer

Pencil and Brushes Table Stand